Shop
The 2-Accessory Connector allows you to direct anesthetic output to 2 animals or two devices (e.g., nose cone and induction chamber). Total tubing length for SomnoSuite® is 18″. Total tubing length for SomnoFlo® is 26″.
The 3-Accessory Connector allows you to direct air flow between three devices (e.g. for SomnoSuite® RoVent® systems: Induction Chamber – Intubation Stand – RoVent Ventilator Tubing).
10-1000-185 – Total tubing length is 20″
10-8000-185 – Total tubing length is 29″
12v AC adapter for use with:
- SomnoSuite®
- SomnoFlo®
- RoVent®
- RoVent® Jr
- PhysioSuite®
- MouseSTAT® Jr
- RightTemp® Jr
- CODA® Monitor
- FIR Warming
18v AC adapter for use with:
Accuris™ Mini Balances are extraordinarily compact, easy to use, and convenient for a variety of laboratory weighing applications. With a footprint of only 2.6 x 3.9 inches, these Mini Balances offer exceptional accuracy and linearity through their full weighing ranges.
Available with either a 100g or 500g capacity, these digital balances feature an easy to read, backlit, liquid crystal display. Buttons for ON/OFF, MODE and TARE are located on the front for easy access. The software includes a calibration function for easy in-lab calibration with a 100g or 500g calibration weight. Calibration weights sold separately.
Designed for portability, the Accuris Mini Balances are powered by 2 x AAA batteries (included). After one minute sitting idle, the auto shut off feature turns off power to conserve battery life. Ideal for lab or field use, each balance includes a snap on protective cover with instructions conveniently printed on the underside.
Brain matrices were developed to provide medical researchers with the ability to precisely prepare discrete regions in fresh or preserved tissue samples.
Acrylic brain matrices are offered as durable and economical devices to prepare your tissue samples. Acrylic matrices are not recommended for heat or cold transfer and will become brittle if cooled or frozen.
We have selected our matrices to section tissue slices to a thickness as small as approximately 1 mm, depending upon what matrix design you choose to use. Ordinary industrial razor blades are generally used to slice the brain and/or tissue material. We recommend that the cutting blade be wetted with saline to act as a lubricant before shearing the target tissue. Micron tissue punches are also available for removal of specific areas of the tissues.
The coronal RBMs have the additional feature of a mid-line sagittal cut to facilitate the splitting of the left and right hemispheres. Sections can be as fine as 1 mm.
- Repeatable slices to 1 mm providing precise blocking prior to sectioning
Capture unused and exhaled anesthetic.
The Aeroneb® Lab Nebulizer uses a high-efficiency aerosolization technology for use in pre-clinical aerosol research and inhalation studies, providing a valuable link between pre-clinical and clinical product development.
Using Aerogen’s OnQ™ Aerosol Generator, the Aeroneb is designed to produce a highly respirable aerosol of virtually any drug in liquid. It produces a fine droplet, low-velocity aerosol without compressed air, and integrates easily into existing exposure and aerosol testing equipment.
Aeroneb is a registered trademark of Nektar Therapeutics.
Aeroneb® Lab Control Module Kit